front right ball joint

7 posts / 0 new
Last post
cmoo's picture
Offline

craig

Jul 20, 2012
front right ball joint

is there any other ball joints that will work on my 1991 nissan pulsar. all the grease popped out of it and not sure if that ruined it or not.

Benno's picture
Offline

Ben
Fort St John, BC

Dec 6, 2009

So it seems the thread about compatible ball joints is MIA??  I swear it was on this site a few weeks ago.  What was the verdict again?  1995 Maxima ball joints will work, just a little snug?

Benno's picture
Offline

Ben
Fort St John, BC

Dec 6, 2009

Ah found the page on my cache haha

"needed a set same day, and crappy tire was only option.  Got a pair of 94 altima ball joints.  they were about .016" bigger than the gtir ones but pressed in with no problem, and I'm actually quite glad they are over snug.

BTW u13, p10, n13, and b12 chassis all share the same ball joint that fits perfectly in our control arm."

and

"Confirmed here get some infinity g20 91 theyll fit perfect just fitted 2 went perfect no need for a press"

cmoo's picture
Offline

craig

Jul 20, 2012

I winded up using g20 ball joints myself with no problem

Benno's picture
Offline

Ben
Fort St John, BC

Dec 6, 2009

yeah just ordered some p10 G20 ball joints.  $30 shipped for 2 off eBay.  I'll let you know if they work out.

AtomicGTiR's picture
Offline

Alex
Ottawa'ish

Dec 8, 2008

I used 94 Altima ball joints for my last replacement, it is a snug fit and work great.

 

Ball Joint Diameter

GTiR = 38.00mm

Altima 94 = 38.20mm

NX2000 = 39.20mm

Pulsar666's picture
Offline

Erik
laval

Jun 10, 2012

I bought today a Moog balljoint from a '94 altima and the seat was smaller than the gtir is in reality. I ended up buying a B13 sentra balljoint instead because it is the same seat size and cone size of whatever was in it.