urethane control arm bushing (energy suspension)
Posted: Tue, 03/30/2010 - 5:21pm
Offline
urethane control arm bushing (energy suspension)
I need to replace the control arm bushing i would like to use urethane bushing so energy suspension is probably the best way to go i used those(sentra ser) for my motor and trany torque mount little bit of customizing but everything work perfect. But now i am wondering if i should use the same for the control arms any body used these for this car and if not what did you use i am looking true the universal set's from energy suspension not to sure so going to give them a call but if somebody already went true this let me now you could save me some time and money thank's
i looked true past posting but can't find anything
can you post some pictures of the transmission mount?
Whiteline and powerflex do control arm bushes.
RNN14
front bush on the front control arm, super pro poly does one
rear bush on the front control arm, i would use the whiteline antilift kit, i'd do the whiteline over the front bush anyday
White line Is supporting new time attack events around the world... I Use there stuff it's excellent.. I vote for them
Mine isn't bigger than yours.. I just like to drive
i looked true past posting but can't find anything
these are the ones i used moog bushings for the 1987up nissan pulsar,they are made in japan, they also have to be pressed on and off
can you post some pictures of the transmission mount?
Whiteline and powerflex do control arm bushes.
all b13 prothane trans and engine mounts
http://www.canadagtir.com/forums/technical/suspension-brakes-handling/whiteline-kca-346-anti-lift-castor-bushing-and-superpro-
the antilift kit is completely worth the cost, i wouldn't bother with a factory replacement
i am going to go with that thank's but do you order them from them or from a distributor(if so who did you use)
Touge tuning in Toronto gave me the best price on all my white line stuff...
Mine isn't bigger than yours.. I just like to drive
wingnut on here is also a whiteline distributor, PM him if you can!
RNN14