I used one from a Nissan Maxima, 94-99, got it from some forum.
NAPA - Outer tie rod - (NCP) 269-3103 - 45$ (each, Maxima 94-99)
You can cross reference a bunch of stuff here at nissan4u.com/parts/sunny and in particular for tie rods look at this: tie rods. It says it doesn't match any other models but I used the maxima part no problem.
ok cool thanks. most often i have found in my career as a mechanic is that sometimes they say a part wont work cuz the part number is not the same but it can be very small unimportant differences that make it that way. i heard alot of maxima stuff works on these cars. thank you!!
I also used the maxima part. It works. AFAIK there are no known matches for the inners, but the pulsar. That said there HAS to be a part that works, it's just a matter of who wants to trial and error till they find one.
I just changed my inner tie rods. I used '94 maxima inners and I can confirm they work.
Damn I just picked up a set of pulsar inners , took a month to come in , $100 a piece , I would have run the maxima had i know you could
__________________
1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam
That sucks. I almost ordered the pulsar ones from the dealer but thought I'd take mine out first and go to a parts store and compare a few to see if I get lucky. Ended up costing $45/ea for the maxima ones. Don't forget to invest in a new boot kit.
lol I was just about to rebuild a spare steering rack with new inner and outer ends.. you saved me like a 100 bucks! Is the boot kit for the 94 maxima adaptable also?
__________________
Mine isn't bigger than yours.. I just like to drive
I confirm the inner tie rod for maxima 95 a32 dont fit in the gtir the rods are too much longer i cant fix the toe so im thinking the inner tie rod of the 94 j30 fits ? lol i spend to much time so i buy the nissan gtir oem to be shure
Offline
verified user
I used one from a Nissan Maxima, 94-99, got it from some forum.
NAPA - Outer tie rod - (NCP) 269-3103 - 45$ (each, Maxima 94-99)
You can cross reference a bunch of stuff here at nissan4u.com/parts/sunny and in particular for tie rods look at this:
tie rods. It says it doesn't match any other models but I used the maxima part no problem.
ok cool thanks. most often i have found in my career as a mechanic is that sometimes they say a part wont work cuz the part number is not the same but it can be very small unimportant differences that make it that way. i heard alot of maxima stuff works on these cars. thank you!!
Wow thanks for this post!
I just ordered mine!
Mine isn't bigger than yours.. I just like to drive
Anyone replace their inner tie rods? Any crossover with other cars?
I also used the maxima part. It works. AFAIK there are no known matches for the inners, but the pulsar. That said there HAS to be a part that works, it's just a matter of who wants to trial and error till they find one.
I just changed my inner tie rods. I used '94 maxima inners and I can confirm they work.
I just changed my inner tie rods. I used '94 maxima inners and I can confirm they work.
Damn I just picked up a set of pulsar inners , took a month to come in , $100 a piece , I would have run the maxima had i know you could
1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam
That sucks. I almost ordered the pulsar ones from the dealer but thought I'd take mine out first and go to a parts store and compare a few to see if I get lucky. Ended up costing $45/ea for the maxima ones. Don't forget to invest in a new boot kit.
SWEEET INFO AGAIN!!
lol I was just about to rebuild a spare steering rack with new inner and outer ends.. you saved me like a 100 bucks! Is the boot kit for the 94 maxima adaptable also?
Mine isn't bigger than yours.. I just like to drive
Not sure on the boots, I had to find them separately so I used boots my buddy had lying around for his skyline.
I just changed my inner tie rods. I used '94 maxima inners and I can confirm they work.
just to clarify is that j30 inners or a32 inners? they changed over in mid 94.
Edit: it is A32 inners
The boot kit for maxima fit ? And is that j30 inners or a32 inners?
boot kit fits, a32 inners
I confirm the inner tie rod for maxima 95 a32 dont fit in the gtir the rods are too much longer i cant fix the toe so im thinking the inner tie rod of the 94 j30 fits ? lol i spend to much time so i buy the nissan gtir oem to be shure
Where did you find oem ones?
At my local Nissan shop they can have all the part for the nissan
jdm cars