Stock turbo/dumppipe would be great. Need intercooler and related plumbing, stock is again prefered. If you do not have these I need help sourcing them out. Thanks!
I have the stock intercooler, and pipe. As in the exhaust elbow/pipe? Or the pipe going from the turbo to the intercooler? Either way, i have both. I'll take pictures of what i have and post them up.
Here's the pictures, let me know what you'd need from them. As you can see the elbow had to have one bolt cut off. And another hole has i think a broken off tap in it. I could try to get them out, but i don't think i'd be able to, it really needs to have a torch taken to it.
Oh man, I'm so happy. That last two deals for an intercool have fell through! I need the intercooler and intercool pipe and elbows. The bolt will come out easy if you center drill (slowly with small bit, then increase sizes, then reverse drill or use a removal tool...like a reverse screw made of machine steel). I've tried many times to get a tap out but the only way I found to get the tap out is to bust it up into small pieces. It's a little trickier because the tool steel is brittle and breaks up when drilled.
If you want to sell me all to keep it simple I will take all. :)
Also, any idea where to find a stock turbo (I've tried all the obvious places like forums and car lots). What would be the best replacement ie: easy to find/service! lol
I have the stock intercooler, and pipe. As in the exhaust elbow/pipe? Or the pipe going from the turbo to the intercooler? Either way, i have both. I'll take pictures of what i have and post them up.
Here's the pictures, let me know what you'd need from them. As you can see the elbow had to have one bolt cut off. And another hole has i think a broken off tap in it. I could try to get them out, but i don't think i'd be able to, it really needs to have a torch taken to it.
Oh man, I'm so happy. That last two deals for an intercool have fell through! I need the intercooler and intercool pipe and elbows. The bolt will come out easy if you center drill (slowly with small bit, then increase sizes, then reverse drill or use a removal tool...like a reverse screw made of machine steel). I've tried many times to get a tap out but the only way I found to get the tap out is to bust it up into small pieces. It's a little trickier because the tool steel is brittle and breaks up when drilled.
If you want to sell me all to keep it simple I will take all. :)
Also, any idea where to find a stock turbo (I've tried all the obvious places like forums and car lots). What would be the best replacement ie: easy to find/service! lol
Are you still looking for an intercooler? I have one and some piping - and I'm in Waterloo.