1992 gtir ontario part out

Posted: Wed, 06/18/2008 - 3:17pm
1992 gtir ontario part out

hey guys, so i am getting my car back this week. it is unfortunaly a write off, but still a ton of good parts, let me know if you guys are interested in any parts :)

Posted: Wed, 06/18/2008 - 3:37pm

how much for the front sway bar end links?

Posted: Wed, 06/18/2008 - 6:40pm

want kind of suspension and do u have a turbo timer how much for both and where are you located

Posted: Wed, 06/18/2008 - 8:45pm

oh dude, I need a few interior pieces. PM ur contact to me....thanks!

__________________

Your girlfriend sucks

Posted: Thu, 06/19/2008 - 4:21am

I need the cluster with tach etc, exhaust if you have one and rear 1/4 panels if they arent mangled. let me know asap and ill be down this weekend to get it

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

Posted: Thu, 06/19/2008 - 4:37am

let me have first dibs on any performance parts. or upgraded from stock. namely a front sturt brace or anything handling related. if you had any sort of back muffler (5zigen or anything) let me know as i will probably snap that up too.

Cheers.

__________________

RNN14

Posted: Thu, 06/19/2008 - 5:18am

hey guys, glad to hear people are interested in parts, as of right now i do not have the car back, should be in the next few days and then i will begin the tear down, pm, with your request for parts and i will get back to you thanks guys

Posted: Thu, 06/19/2008 - 8:35am

how much do you want for the engine and trans if you dont plan on using it in something else.

Posted: Sat, 06/21/2008 - 4:44pm

I'm looking for the 2 little plastic clips that the rear package shelf clips into. Yes, I think big. :-)

Have an original umbrella? Mine is well used... :-)

__________________

"Your race car should be easier and more pleasant to drive than your street car. If it isn't, then someone is doing something wrong."
-- Carroll Smith (1932-2003)

Posted: Sun, 06/22/2008 - 9:44am

maikeru, i dont have thoes clips as my shelf was missing them when i got it, and i do have the unbrella but i'll be holding on to that :) sorry bud

Posted: Mon, 06/23/2008 - 8:37am

hey guys, i got the car back on thursday of last week. i have the car already stripped down, so if you would like to get parts off me please call me at 905 259 6365 cell or 905 430 0608 home. first come first serve, some parts are already reserved.

Posted: Tue, 06/24/2008 - 2:32am

ho hum, any suspension goodies that have been uprated? and if you had HID's, count me in for them if they are less than $250.

__________________

RNN14

Posted: Tue, 06/24/2008 - 4:30am

cluster and exhaust are mine. anyone got a nice 3 dp and elbow for sale lol

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

Posted: Tue, 06/24/2008 - 9:00am
BenMack1989 wrote:

maikeru, i dont have thoes clips as my shelf was missing them when i got it, and i do have the unbrella but i'll be holding on to that :) sorry bud

NP - I figured that with the umbrella. But someone was eventually going to have to ask... ;)

Are you sure the clips aren't there? I'm looking for the clips on the body side, not on the clips on the shelf itself. So even if you didn't get the movable part of the package shelf, if the fixed piece surrounding the shelf was there, then the clips may be.
It's not a part I can find in FAST, so I have to scronge... :-p

Thanks,
Mike

__________________

"Your race car should be easier and more pleasant to drive than your street car. If it isn't, then someone is doing something wrong."
-- Carroll Smith (1932-2003)

Posted: Tue, 06/24/2008 - 10:11am

ahhh i miss understanding, well than i do have thoes clips. :)

Posted: Tue, 06/24/2008 - 3:01pm

make a list of uprated piece you have maybe you'll be able to sell them faster

Posted: Tue, 06/24/2008 - 3:21pm

do you have the rear arch trim ? those little plastic trim at the top of the wheel ?

Posted: Mon, 06/30/2008 - 3:59am

PM sent

__________________

"Your race car should be easier and more pleasant to drive than your street car. If it isn't, then someone is doing something wrong."
-- Carroll Smith (1932-2003)

Posted: Mon, 06/30/2008 - 6:35pm

is your alternator alright / in good shape?

__________________

Guaranteed to put a smile on the front of your head!

Posted: Sat, 07/05/2008 - 10:11am

front crome bumper middle lip ???

Posted: Sun, 07/06/2008 - 1:38pm

sorry man, no lip

Posted: Sun, 07/06/2008 - 8:04pm

pm'd

__________________

Ur not JDM till ur RHD

Posted: Thu, 07/17/2008 - 6:10pm

pm,ed

__________________

...every silver lining has a cloud.

Posted: Tue, 07/22/2008 - 4:45am

do you have the rad hoses? I don't want to make the same mistake as last year and have to run the car forever to warm it up in the winter. I want to install an inline water heater.

Let me know what you want for the rad hoses if you still have them.

Thanks.

__________________

RNN14

Posted: Tue, 07/22/2008 - 7:03am

sorry the rad hoses were split in the accident

Posted: Sat, 08/02/2008 - 3:15am

can i call the a pillar plastic trim piece for the drivers side and all the necessary parts to stick it to the car.

Thanks.

__________________

RNN14

Posted: Sun, 08/10/2008 - 9:42am

As long as the car is black i would be interested in snagging the clip that covers the front tow hook, if it didn't get smashed in the crash. Also, i live in winnipeg, so it would have to get shipped, let me know if thats even worth your time..

Posted: Sun, 08/10/2008 - 1:27pm

hey ben..how is the hood on the car..i have to send on for the molds and was woindering if it was ok or bent up.

Posted: Tue, 08/12/2008 - 6:40am

Did the windshield survive? Is it crack free?
How about the center console lid behind the ebrake?
The interior piece on the passenger side that has the bracket for the emergency flare? (can't tell you how many times that has been kicked by people getting in the car, and now it's cracked)

Posted: Sun, 08/24/2008 - 12:49pm

Got an ECU?

__________________

BOOST'N

Posted: Wed, 09/03/2008 - 5:18pm

Got my parts from ben good guy to deal with and had no troubles at all. thanx again ben ur a lifsaver lol.

Posted: Sun, 09/07/2008 - 9:54am

rhed sold his ecu before i could get it and i need your ecu as well, mines fried
pm me please

__________________

1991 GTiR r.i.p
1979 Volvo 262c Bertone
1991 GTiR No. 2 :D

Posted: Wed, 10/08/2008 - 4:23pm

Hey Ben u got the brake booster still? if so how much?

Posted: Sun, 10/12/2008 - 12:42pm

Hello

Do you have some upgrated calipers and disc?

Thanks

__________________

A car without turbo, it is like a coke without bubbles ......

Posted: Mon, 10/13/2008 - 9:15am

bens a great guy to get the parts off, held an exhaust for me for a long time, thanks bro

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

Posted: Wed, 10/22/2008 - 3:50pm

sorry dude. stock brakes

Posted: Thu, 11/06/2008 - 4:33pm

ben i alled u the other day,im the guy from orlando fl.
can you get me a pric for both door mirrors and the power mirror switch please

Posted: Fri, 11/07/2008 - 12:57pm

Pmed

Posted: Wed, 11/12/2008 - 11:19am

front crossmember, and the parcel shelfgtirrmtbar.jpg parcel_shelf.jpg shipped to nj

Posted: Sat, 11/29/2008 - 7:12pm

Hey Ben, if the dash is still in good condition with no rip or tears, I'll take it. Drop me a mail at jardamuth@hotmail.com

__________________

Posted: Sat, 11/29/2008 - 8:35pm

if you got a steering rack and the rear fender trim ill take it

Posted: Mon, 02/02/2009 - 5:12pm

Hey

Are still parting out? I'm in need of some front RS suspension parts (LCA, tie rod and axle)

Oh and a front bumper too

Let me know

Jeff

Posted: Fri, 02/06/2009 - 9:52pm

what about the headliner??? sunroof as well?? where are you located anyways... im 905 Brampton...

Posted: Mon, 02/16/2009 - 10:30pm

Are you willing to ship to california? I need a drivers seat

__________________

92GTIR RA

Posted: Fri, 04/03/2009 - 8:35am

hey are you still parting out im looking for the maf sensor and just engine and transmission mounts im in toronto are you willing to ship there please let me no thanks

Posted: Sat, 05/02/2009 - 10:55pm

hey do you have the front grill? and possibly the drivers side window/locks control unit thingy! the passenger window button on the drivers side doesn work! and my car was in an accident and the 1st owner in canada decided to keep the grill...arg!!!! thanks

__________________

~It's Miller Time~

Posted: Sun, 06/21/2009 - 4:54am

how much for turbo- manifold and hard lines and elbow....?

__________________

building sr20ve-t boost is god

Posted: Sun, 06/21/2009 - 7:16am

I sent off a PM.

Posted: Sun, 06/21/2009 - 2:06pm

Is this part out still going? do you have uprated suspension? looking for adjustable springs with really stiff spring rates, front rear strut bars, polyurethane bushings...anything to do with making the car drive like a wheelbarrow.. (building an auto-x machine, can't have my brother take first place anymore!)

Posted: Sun, 06/21/2009 - 7:36pm

where can i get a mass air flow sensor??? is there a universal type i can use???

Posted: Sun, 06/21/2009 - 8:24pm

My PM is concerning rear seat belt buckles, the buckles the seat belt goes into.I need the two left ones.

Canada GTiR Forum

User login

Popular GTiR Articles