Thinking About selling my buit gtir

Posted: Thu, 06/16/2011 - 3:28pm
Thinking About selling my buit gtir

Hey Guys. Ive been doing some thinking lately and seems like the time has come to part ways with my Pulsar. first off id like to say, I am well know here on this forum and a few can vouch for my car. I have countless amounts of hours and money put into My car. The car is in great great shape. Drives,hanndles and looks awesome.

It Begins :

1991 Pulsar Gtir, you all no the normal. 2.0L turbo awd

124,044 Km on the body. swapped engine with aproximatly 85,000km ( currently in the car )

Black ( paint is 8 out of 10 for a 20 year old car)

sitting on 16" x 7.5 jdm WORK rims ( so rare i cant even find a picture of them on the internet )

BC Racing RM Inverted coilovers ( 30 way damper, fully adjustable, And also not the ones from the group buy on here, there are the next step up from thoes. imported straight from UK ).

FULL and I MEAN FULL Power Flex Poly urathane bushing kit ( every bushing on the car has been replaced )

White line front anti-lift caster kit.

Cusco lower control arm brace

Front and rear cusco strut tower braces.

Full 2 3/4" tanabee turbo back exhaust.

new ball joints

new tie rods

new Wheels bearings ( all four )

rebuilt axles

All suspension parts have been sandblasted and repainted.

Brand new oem brakes with ebc redstuff pads ( new oem front and rear rotors )

Exedy stage 1 clutch

All royal purple fluids ( engine, trans, center diff, rear diff )

stainless exhaust manifold

brand new Garret gt28 60rs ( not even 200 km on it )

50mm rad

31x12x3 intercooler with 2.5 inch hot side and 3 inch cold side piping.

hks ssqv 3 limitied edition black blow off valve

silicone rad hoses.

stainless braided oil/ water lines

3" intake with 5" k&n cone filter

Greddy oil catch can

custom aluminum rad overflow tank

upgraded timing chain tensioner.

Apexi SAFC 2 Fuel controller

Apexi AVCR Boost controller

AEM Wide band air/fuel meter

Prosport Oil temp gauge

prosport Oil Pressure Gauge

Prosport Water Temp pressure

Prosport Boost Gauge

Prosport Exhaust temp gauge

Panasonic 7" flip screen dvd player

Walbro 255 lph fuel pump

thats everything on the car, probably missed a ton of stuff. had this car too long to remember everything.

Now a list of part i have to go with the car

Gtir Engine.( minus - turbo, manifold, powersteering pump, wiring, )

ecu

Full cometic gaskit kit.

brand new water pump

brand new timing chain.

brand new head gasket

alternator

also a full drive line, ( trans, front diff. rear subframe with diff and axles, drive shaft, front axles ( need to be rebuilt )

if i remember anything else or find other stuff i will add it on here. as of right now with everything i have listed. i am asking $15,500 for a track ready or reliable street machine and every single pulsar part i have.
also forgot to mention. all upgraded parts are brand new with less than 200 km of break in. other than like the exhaust, clucth has 5000 k from some one on this forum. umm strut bars are used. everything is in either brand new or excellent condition.

IMG_0068.jpg

IMG_0069.jpg

IMG_0067.jpg

IMG_0066.jpg

IMG_0311.jpg

IMG_0312.jpg

IMG_0325.jpg

IMG_0321.jpg

IMG_0322.jpg

IMG_0323.jpg

IMG_0327.jpg

IMG_0346.jpg

IMG_2466.jpg

IMG_2470.jpg

IMG_2484.jpg

Posted: Thu, 06/16/2011 - 6:20pm

why dude why.....

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

Posted: Fri, 06/17/2011 - 4:07am

my priorities have changed lol

Posted: Fri, 06/17/2011 - 8:31am

Your GTIR is very clean and has obviously been very very well taken care of. Just the bushing job alone is killer time and money (I know I just did mine and took me over 30 hours with painting and all).

I wish I could pick up a third GTIR but alas, the wife would kill me.

Good luck with the sale if it comes down to it.

Posted: Fri, 06/17/2011 - 9:15am

thanks very much. 

Posted: Fri, 06/17/2011 - 9:34am

thanks very much. 

Posted: Fri, 06/17/2011 - 9:48am

I did the same POR'd the rear sub frame and did bushings... great mod list

__________________

Mine isn't bigger than yours.. I just like to drive

Posted: Sun, 06/19/2011 - 1:19pm

Offically for sale.

Posted: Mon, 06/20/2011 - 4:13pm

fyi.... your asking way to much for this. great looking car tho

Posted: Mon, 06/20/2011 - 6:45pm

id say its a pretty fair starting price considering i have well over 20 grand into the car and what your getting with the car. so if you dont like the price. then dont comment

Posted: Mon, 06/20/2011 - 7:12pm

Bump for a fair price !

Posted: Mon, 06/20/2011 - 9:59pm

dang man for under 30 mine has a proven 620 bhp with a ppg gearbox

Posted: Tue, 06/21/2011 - 2:57am

thats nice

Posted: Wed, 07/06/2011 - 5:12am

bump

Posted: Wed, 07/13/2011 - 3:38am

i am now concidering a part out if there is enough interest in the main parts such as  both my engines and 2 full drive lines. and also a minty mint 91 shell. id prefer not to part out but if it comes to it. as of right now this IS NOT!!!!! a part out yet
just want to see the interest

Posted: Wed, 07/13/2011 - 5:57pm

Your car is where I want mine to go.  Funny how that most (if not all) of us have fun doing those mods ourselves.  To see the transformation and appreciate the hard work like no one else can is such a good feeling.  I am impressed and respectful of the time and care you put into it.  Good luck.

1) there is never enough
2) there is always something faster/better
3) the quicker we learn to accept what we have the more money we save (lol)

Sincerely,
Ken

ps I think i may have some of your oem parts i picked up from Irishjohn and maybe you direct

__________________

GTi-R, the best ugliest car I've EVER seen/driven. You can make it cool, you can make it fast but you CAN'T make it look pretty.

Posted: Wed, 07/13/2011 - 6:00pm

thanks. i appreciate the respect. and you most likely have my stuff from john. and i think may have come by my shop one time 

Posted: Wed, 07/13/2011 - 6:01pm

id be interested in full coil over setup/ all control arms with bushings and rear sub frame, I would also trade stock subframe with oem bushings also control arms since i want to do the bushings in mine

__________________

1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam

Posted: Wed, 07/13/2011 - 6:16pm

thanks. i appreciate the respect. and you most likely have my stuff from john. and i think you may have come by my shop one time 

Posted: Wed, 07/13/2011 - 9:25pm

If your willing to part it out I'm interested in:
- FULL poly bush kit
-50mm rad
- ball joints and tie rod ends

Posted: Sat, 07/16/2011 - 2:13pm

really need this car gone. would prefer not to part out. open to offers. like i said. really need this gone now

Posted: Mon, 07/25/2011 - 11:51am

bump. price drop. 13,500 need it gone

Posted: Wed, 08/03/2011 - 7:52am

bump. price drop. 13,000 obo

Posted: Mon, 08/22/2011 - 4:41am

guys seriously need the car gone. best offer takes the car and parts

Posted: Mon, 08/22/2011 - 3:07pm

I am seriously interested in the complete suspensing and controlarm/ rear subframe assembly , I would take it all out my self and replace it with all oem stock parts plus cash

__________________

1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam

Posted: Mon, 08/22/2011 - 3:43pm

If I didn't already have 3 vehicles and my project gtir I'd buy this in a heartbeat..... Let me know if you break it down I'm seriously interested in a lot of parts off this car

Posted: Mon, 08/22/2011 - 4:49pm

gah just need to sell my subaru and have 2 of these DD and track whore

__________________

Mine isn't bigger than yours.. I just like to drive

Posted: Mon, 08/22/2011 - 7:16pm

im still not ready to part unless i have both engines. both drive train. and the shell sold before i part it.
and zed. Sell! Sell! Sell !!! hahaha

Posted: Thu, 09/01/2011 - 10:00am

second motor sold pending pick up. 

Posted: Sat, 09/03/2011 - 9:11am

motor sold

Posted: Thu, 09/15/2011 - 6:36am

How much do you want for the shell

Posted: Thu, 09/15/2011 - 8:32am

what would you offer ? and just the stripped shell ? would u want anythig else. or just bare shell ?

Posted: Thu, 09/15/2011 - 2:13pm

Well if it still had most of the interior that would be nice and some what rollable would be nice as well
I have a good running car but people in the past jacked it up on the pinch welds and crushed it everywheres.
Last time i bought a shell i paid 1500 but it had the drivetran and everything just no motor so i really dont
Know what would be a far price to offer your car looks spot less

Posted: Thu, 09/15/2011 - 5:27pm

pm me and we'll talk

Posted: Thu, 09/15/2011 - 5:29pm

pm me and we'll talk

Posted: Sun, 09/18/2011 - 8:42am

BUMP..... NO REASONABLE OFFER REFUSED........ need this gone asap as i am move across the country very soon

Posted: Sun, 09/18/2011 - 9:03am

Price drop to 10,500

Posted: Sun, 11/13/2011 - 9:20am

bump

Posted: Sun, 11/13/2011 - 9:21am

need gone asap. and i really do mean asap. make me an offer

Posted: Wed, 11/23/2011 - 8:27am

bump. getting desperate to sell. make me an offer some one 

Posted: Thu, 12/01/2011 - 3:47pm

ANy rust? Sunroof model?

Did you drive it in the winter?

Posted: Thu, 12/01/2011 - 4:30pm

no rust. no sunroof. never seen a winter

Posted: Thu, 01/26/2012 - 3:59pm

bump. still for sale. minus dvd screen

Posted: Wed, 02/01/2012 - 4:30am

$9000 obo

Posted: Wed, 02/01/2012 - 10:28am

I did the same thing as you...i move from Montreal to Victoria B.C, try to sell the car by finally decide to drove it all the way here! is it possible for you? awesome car keep it!

Posted: Sun, 02/12/2012 - 11:16am

bump would really like to see this go soon. getting annoyed with trying to sell this

Posted: Sun, 02/12/2012 - 5:05pm

Where are you located?  I'd like to come look at it.

Posted: Mon, 02/13/2012 - 6:33am

im in whitby man. other side of toronto

Posted: Mon, 03/26/2012 - 8:08am

$8000 obo. would like gone soon make me a reasonable offer

Posted: Mon, 03/26/2012 - 3:29pm

lynx ill go look at it with you :) I want to see this beast in person :) I'm shocked its still forsale !

__________________

1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam

Posted: Mon, 03/26/2012 - 4:29pm

he looked at it a little while ago. and yes im stil shocked to. tire kickers and talkers are suuuuper annoying. 

Canada GTiR Forum

User login

Popular GTiR Articles