Home › Forums › Buy and Sell › For Sale

Parting out 92 Nissan Pulsar GTIR

Posted: Sat, 01/31/2009 - 6:03pm
Parting out 92 Nissan Pulsar GTIR

Hit in rear and front, still runs good, sr20det awd good hood, black in color. approx 80xxx km. can take credit card and ship, or list on e-bay if you want to be safe. e-mail me, or call me : fourxtoys@shaw.ca, 403-320-8609 Mike. Sothern Alberta Canada.

    Sold:
  • Right side power window motor
  • Left side door glass
  • Apexi intake
  • Battery tray and holddown
  • Front strut bar, ABS module, & e-brake lever
  • Throttle Cable
  • Both front CV axles and stub shaft
  • Left Plastic cap moulding #25
  • Antennae, & carbon canister bracket
  • SR20 long block with turbo, Intake Manifold and injectors, alternator, wiring harness, ECM, A/C pump, P.S. pump, flywheel and clutch, etc.
  • Rear diff with subframe, cv axles, control arms, etc
  • LF signal light assembly
  • Cargo tray
    Still Available:
  • Heater controls $100
  • Factory center triple guage cluster with oil pressure, oil temp, and boost $75
  • Front brakes with calipers, rotors, pads, & hoses $200
  • Rear brakes with calipers, rotors, pads & hoses $150
  • Rear driveshaft from transaxle to diff $75/piece, or $150 for all 3
  • Intercooler $200
  • Rear Hatch Spoiler $150
  • Black hood with factory scoop $350
  • Transmission/transaxle assembly $750
  • Mirrors $75 each
  • Right side door glass $100
  • Left front fender $150
  • Center e-brake console with compartment and lid $50
  • Starter $125
  • Right side (drivers) door shell $250
  • Left side door shell $150

#1
Posted: Sat, 01/31/2009 - 11:55pm

pm me with a price regarding the oem shocks, can be dead. i just want the housings really

#2
Posted: Sun, 02/01/2009 - 8:44am

Need the rear seat belts, just the bottom of the left and right ones... PM me..

#3
Posted: Sun, 02/01/2009 - 9:17am

i need the left plastic cap moulding #25 14171380167989.png

#4
Posted: Sun, 02/01/2009 - 9:21am

any rear strut bar?umbrella

#5
Posted: Sun, 02/01/2009 - 10:24am

Any aftermarket parts?

#6
Posted: Mon, 02/02/2009 - 7:13am
gtir007 wrote:

any rear strut bar?umbrella

No, umbrella is gone, and there was no rear strut bar. Front strut bar is still here.

#7
Posted: Mon, 02/02/2009 - 7:17am
modform wrote:

Any aftermarket parts?

There is an APEXI cold air intake, and filter. There is a Brembo sticker on the back of the car, but the rotors look stock, the front Calipers might be Brembo, but I'm not sure. Momo steering wheel with lots of wear, front strut bar.

#8
Posted: Mon, 02/02/2009 - 11:31am

How much for that apexi intake?

#9
Posted: Mon, 02/02/2009 - 5:06pm

Hi
Im new to this forum. My buddy just bought a GTIR here and promptly slid it into a curb bending up the Right side front wheel assembly.

Would you part out the Right side Lower control arm, Tie rod (inner and outer) and drive axle.
Please provide pricing with shipping to
Beaver Cresent
Brantford, ontario
N3P 1T3

thanks
Jeff

#10
Posted: Mon, 02/02/2009 - 5:09pm

learning about the shitty oem gti-r brakes the hard way

#11
Posted: Wed, 02/04/2009 - 6:29am

Pm'd

jkube wrote:

Hi Im new to this forum. My buddy just bought a GTIR here and promptly slid it into a curb bending up the Right side front wheel assembly. Would you part out the Right side Lower control arm, Tie rod (inner and outer) and drive axle. Please provide pricing with shipping to Beaver Cresent Brantford, ontario N3P 1T3 thanks Jeff

#12
Posted: Wed, 02/04/2009 - 8:08am

hey nick, if he has good shocks, ill buy them and send you min, you pay postage an you can have them for free?

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

#13
Posted: Wed, 02/04/2009 - 12:17pm

works for me

#14
Posted: Fri, 02/06/2009 - 1:28am

hey how much for the inside headliner... possibly the sunroof aswell...weather stripping and all?
shipping to Brampton, ON????

#15
Posted: Fri, 02/06/2009 - 6:31am

The headliner is going to be a bit of a job to pack and ship as it is so large, and can't be bent. I would guess that packaging and shipping these items will cost well over $100. I'd sell the headliner for $150, the sunroof for $300. Packaging and shipping would be at your expense, I will do more research on the shipping and packaging when you are ready to buy. It will probably be late next week before I could get the stuff out, and do more research on shipping.

SpHiNxXx wrote:

hey how much for the inside headliner... possibly the sunroof aswell...weather stripping and all? shipping to Brampton, ON????

#16
Posted: Fri, 02/06/2009 - 7:24am

what are the rear 1/4 panels like, im looking for approx a 4" strip along the arches, i can send a pic if you would be interetsed in gutting a part out for me?

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

#17
Posted: Fri, 02/06/2009 - 12:51pm

Looking for both front axles shipped to the U.S. zip 63379. Thanks Chris

#18
Posted: Sat, 02/07/2009 - 7:10pm

i need the antenna and the bracket for the charcoal canister-

#19
Posted: Mon, 02/09/2009 - 5:52am

I still have both of them, what would you be willing to offer for these parts?

gtir007 wrote:

i need the antenna and the bracket for the charcoal canister-

#20
Posted: Mon, 02/09/2009 - 7:28am

pm sent

#21
Posted: Mon, 02/16/2009 - 10:28pm

If in good condtion how much for the drivers seat? Willing to ship to California?

__________________

92GTIR RA

#22
Posted: Thu, 02/19/2009 - 11:21am
4xtoys wrote:

Hit in rear and front, still runs good, sr20det awd good hood, black in color. approx 80xxx km. can take credit card and ship, or list on e-bay if you want to be safe. e-mail me, or call me : fourxtoys@shaw.ca, 403-320-8609 Mike. Sothern Alberta Canada

I FINALLY HAVE THIS CAR ON THE HOIST, AND AM DISASSEMBLING IN THE NEXT DAY OR 2, SO IF YOU NEED SOME PARTS, NOW IS THE TIME. I GOT ALOT OF INTEREST PREVIOUSLY, BUT GOT SO BUSY THAT I COULDN'T TAKE IT APART. LET ME KNOW WHAT YOU WANT.

MIKE fourxtoys@shaw.ca

#23
Posted: Thu, 02/19/2009 - 12:44pm

check PM

#24
Posted: Thu, 02/19/2009 - 5:14pm

Front CV Axles, and stub shaft sold, and shipped out today, APEXI intake, and battery tray sold and shipped out today. Rear subframe with diff, control arms and axles removed today, pending sale!

#25
Posted: Fri, 02/20/2009 - 9:41pm

Would you take $20usd for your oil catch tank and outside chrome windshield trim that fastens with I believe 4 screws on either side of the windshield? I live in 98221 washington, let me know how much for shipping if interested. Thanks, mike

__________________

Drive it like you stole it

#26
Posted: Sat, 02/21/2009 - 9:48am

Motor and trans now out sitting on floor waiting to be sold.

#27
Posted: Mon, 02/23/2009 - 8:09pm

I look forward to purchasing the motor!!

#28
Posted: Tue, 02/24/2009 - 12:08am

how much for the GTiR logo from the rear... and any emblem up front???

#29
Posted: Tue, 02/24/2009 - 8:25am
SpHiNxXx wrote:

how much for the GTiR logo from the rear... and any emblem up front???

The rear logo was wrecked in the accident, and there isn't a front one

#30
Posted: Tue, 02/24/2009 - 8:28am
mbsilvia wrote:

Would you take $20usd for your oil catch tank and outside chrome windshield trim that fastens with I believe 4 screws on either side of the windshield? I live in 98221 washington, let me know how much for shipping if interested. Thanks, mike

The oil catch tank is being sold with the complete engine, sale pending. If this sale dosen't go through today, I have another guy interested in the motor and he dosen't need the catch tank, and I will sell it seperately.

#31
Posted: Tue, 02/24/2009 - 8:29am
low612 wrote:

If in good condtion how much for the drivers seat? Willing to ship to California?

Driver's seat is broken

#32
Posted: Sat, 02/28/2009 - 11:26pm

Exhaust?

#33
Posted: Sun, 03/01/2009 - 12:14am

I received the motor just days after I had ordered it. Great service!!

Thanks again.

#34
Posted: Sun, 03/01/2009 - 7:47am

Exhaust looks home built, all 1 piece to the rear, then the stock S shaped pipe, and muffler. $100, but shipping would be a bitch.

rkcarguy wrote:

Exhaust?

#35
Posted: Mon, 03/02/2009 - 1:35am

Do you still have the front grill (between the headlights)?

__________________

All go, no show

#36
Posted: Mon, 03/02/2009 - 6:12am

Sorry, no grill

GTIR DONE wrote:

Do you still have the front grill (between the headlights)?

#37
Posted: Sat, 04/18/2009 - 5:07pm

Here's some images of the wreck I took when picking up some parts: [edit]
..pics removed to save space.. pm if req...
Lots of other jdm there.

#38
Posted: Tue, 03/10/2009 - 12:51pm

can you send me closer pics of the arches on the rear- ill send you a pm with what i need if thats cool

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

#39
Posted: Tue, 03/10/2009 - 2:16pm

sure, best pm 4xtoys here for current list, he is owner and has other jdm on his yard there too.
i'll pm you larger images of arches; right rear is X, others seem ok.

#40
Posted: Tue, 03/10/2009 - 3:24pm

sounds good thanks

__________________

BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN

#41
Posted: Tue, 03/10/2009 - 4:05pm

if you still have the passenger door in complete shape, I need the window regulator setup from it. If it is available let me know and I can paypal money for it or otherwise have a friend drop off some cash and pick it up.

Thanks.

__________________

RNN14

#42
Posted: Thu, 03/12/2009 - 6:39am

I have sent you a PM, regulator set-up is still available

canadianR wrote:

if you still have the passenger door in complete shape, I need the window regulator setup from it. If it is available let me know and I can paypal money for it or otherwise have a friend drop off some cash and pick it up. Thanks.

#43
Posted: Sat, 04/18/2009 - 8:36am

TTT

#44
Posted: Wed, 05/06/2009 - 1:40pm

Sup, Need stock floor mats, parcel cover, drivers side motor mount, and the A/C compressor. LMK thx. Mike sales@pridemotorsport.com

__________________

1989 BNR32 1993 RNN14 2004 Super Crew

#45
Posted: Wed, 05/06/2009 - 2:58pm

Sent you an e-mail with pics of the front floormats, that's all I had from your list CHEERS!!!

Pride Motorsport wrote:

Sup, Need stock floor mats, parcel cover, drivers side motor mount, and the A/C compressor. LMK thx. Mike

#46
Posted: Wed, 05/13/2009 - 11:27am

Hi,

How much for :
Black hood with factory scoop $350
Left front fender $150

shipped to quebec g8h3k1

thank you

#47
Posted: Fri, 05/29/2009 - 11:34am

do you have a front driver side headlight .

thanks

#48
Posted: Fri, 05/29/2009 - 12:31pm

No

#49
Posted: Wed, 07/01/2009 - 9:08pm

DO YOU HAVE THE OEM STEERING WHEEL??? HOW MUCH???

#50
Posted: Thu, 07/02/2009 - 5:16am

No, it has a MOMO steering wheel on it.

12next ›last »

Canada GTiR Forum

more

User login

Popular GTiR Articles

more