Home › Forums › Buy and Sell › For Sale

Parting Out 1991 GTiR, front end damage

Posted: Thu, 04/08/2010 - 1:42pm
Parting Out 1991 GTiR, front end damage

I have a 1991 Nissan Pulsar GTiR that I am parting out. This car has front end damsge, but not terrible. It would be fixable with a new rad support, bumper, and a few other things. I don't have the desire to fix it, so I am parting it out. 106043KM on this car, black in color. NO UMBRELLA!!!. Recent Wilwood front brake kit with drilled and slotted rotors. Newer 5Zigen Bronze Pro Racer Wheels. Front & rear strut bars, B&M short shifter. I can take Paypal, EMT, or credit card. PM me, or call for pricing. Mike 403-320-8609 fourxtoys@shaw.ca
Items sold: Wilwood brakes, and 5Zigen wheels,

#1
Posted: Thu, 04/08/2010 - 2:46pm

pm'd

#2
Posted: Thu, 04/08/2010 - 4:01pm

pm'd also

#3
Posted: Thu, 04/08/2010 - 4:26pm

hey if you dont want to sell I have a rad support I could sell ya! other wise howmuch for the whole wreck?

__________________

...every silver lining has a cloud.

#4
Posted: Thu, 04/08/2010 - 7:14pm

how much for the willwood kit? I would take the handle for the inside of the passenger door if you can, I broke the lock tab on mine.

#5
Posted: Fri, 04/09/2010 - 2:41pm

Wilwood brakes, 5Zigen wheels, and rear spoiler sold!

#6
Posted: Sat, 04/10/2010 - 5:15am

pm'd about the strut bars

#7
Posted: Sat, 04/10/2010 - 7:05am

hows the windshield?

__________________

...every silver lining has a cloud.

#8
Posted: Sat, 04/10/2010 - 7:56am

Windshield is bad

rhed wrote:

hows the windshield?

#9
Posted: Sun, 04/11/2010 - 1:06pm

Pm'ed

#10
Posted: Tue, 04/13/2010 - 4:08pm

How are the driver side door hinges? My pins are sloppy causing door droop and i need some tight ones.

__________________

...every silver lining has a cloud.

#11
Posted: Tue, 04/13/2010 - 4:48pm

how about the rear passenger side fender lip?  

#12
Posted: Sun, 04/25/2010 - 6:25pm

Any rust on the undercarriage or the rest of the body? Did you drive this before it was wrecked? If you did how did it drive?

#13
Posted: Mon, 05/03/2010 - 7:38am

om'd u 2

#14
Posted: Mon, 05/03/2010 - 8:15am

pm'd you

sr71sss wrote:

om'd u 2

#15
Posted: Mon, 05/03/2010 - 8:15am

It's good, $50

nick wrote:

how about the rear passenger side fender lip?  

#16
Posted: Tue, 05/25/2010 - 3:21pm

how much for the front grill, ecu harness and driver a-pillar (only the plastic part)?

#17
Posted: Wed, 05/26/2010 - 7:08am

Grill is gone, the ecu harness stays with the engine unless the engine sells first. Although I do have another harness from a different car I parted, only problem is that the 6 or 7 wire connector that goes to the passenger inner fender has been cut, and the connector is missing. $100 for that harness. $40 for the driver a-pillar trim

JFRacing911 wrote:

how much for the front grill, ecu harness and driver a-pillar (only the plastic part)?

#18
Posted: Thu, 05/27/2010 - 1:50pm

pm'd 4xtoys

#19
Posted: Tue, 10/05/2010 - 5:13pm

still parting out?
request price and condition on the power steering rack , engine wiring harness, intake manifold sent to zip code 94531 california...

#20
Posted: Tue, 10/05/2010 - 5:40pm

how about the drivers side rear hub Assembly complete with the brake disk if any good and the caliper? also need all the brackets for mounting the rear seats. i dont know how many there are but i need em all as well as the bolts for them. thanx.?

#21
Posted: Tue, 10/05/2010 - 6:32pm

any aftermarket rear swaybar? =)

__________________

-Mike

#22
Posted: Fri, 10/08/2010 - 6:57pm

rear bumper cover? thanks

#23
Posted: Sat, 10/09/2010 - 6:36am

No.

spd-dmn wrote:

any aftermarket rear swaybar? =)

#24
Posted: Sat, 10/09/2010 - 6:36am

$125 plus shipping.

jr. mint wrote:

rear bumper cover? thanks

#25
Posted: Sat, 10/09/2010 - 6:38am

$175 for rear hub with all brake parts. $50 for all the rear seat mounting brackets

no_boost wrote:

how about the drivers side rear hub Assembly complete with the brake disk if any good and the caliper? also need all the brackets for mounting the rear seats. i dont know how many there are but i need em all as well as the bolts for them. thanx.?

#26
Posted: Sat, 10/09/2010 - 6:39am

I will check into the condition of these parts, and the cost of shipping them when I have a little more time to do so. Sorry for the inconvenience, but thinks are stupidly busy around here these days

sr71sss wrote:

still parting out? request price and condition on the power steering rack , engine wiring harness, intake manifold sent to zip code 94531 california...

#27
Posted: Thu, 11/11/2010 - 4:19pm

How much for the rest of the car?

#28
Posted: Sat, 11/20/2010 - 6:07am

hey bud i am looking for drivers side wheel well plastics just the outer bit and maybe your tierods up and low depending on the condition and price.

#29
Posted: Sat, 11/20/2010 - 8:15am

how much for the engine?

__________________

Guaranteed to put a smile on the front of your head!

#30
Posted: Sat, 11/20/2010 - 10:07am

Depends on how complete you want it. $1700 complete with trans, ecu, wiring harness, etc.

ColdGTi-R wrote:

how much for the engine?

#31
Posted: Sat, 11/20/2010 - 1:49pm

Any drivers side axle available?

Shipped to 94531

#32
Posted: Sat, 11/20/2010 - 3:00pm

Ya, I have them in stock. $140 plus shipping. Shipping to you will be $38.92 for 6 business days on canada post expedited parcel service. So total price shipped to you will be $178.92

sr71sss wrote:

Any drivers side axle available? Shipped to 94531

#33
Posted: Sat, 11/20/2010 - 4:36pm

condition of drivers side axles please...

#34
Posted: Mon, 11/22/2010 - 5:09pm
sr71sss wrote:

condition of drivers side axles please...

Condition is Good, No rips or tears in boots.

Canada GTiR Forum

more

User login

Popular GTiR Articles

more