Aftermarket and Stock Parts!!!
OfflineI'm selling all my old pulsar stuff that I won't be needing anymore because I bought Mike's (The Bear) engine, gearbox and a few other goodies off of him... Unless mentioned in the descrption everything listed was taken from my pulsar with just over 100,000k on it. I'll be starting on this project this summer and I simply don't have enough room for all of it in my garage. Here is the list: Engine Block (#2 cyl. is slightly damaged should be re-sleeved or bored out), Sandard gearbox, NEW Darton sleeves, NEW timing chain, NEW oil jets, NEW ARP head studs, NEW 300ZX MAF with pigtail, Standard Turbo (needs a rebuild but was still pushing 16psi), 8mm Ignition leads, Distributor cap and rotor, Complete intake manifold with throttle bodies, JWT 72 lb/hr (750cc) injectors - only 5000km on them, FMIC 3' x 12' x 30' with intercooler piping (brand unknown), Apexi NEO with wiring harness for direct plug and play, Standard Crankshaft ...And the list goes on. You might have noticed I didn't post any of the prices so if you are interested PM me and MAKE AN OFFER. There are many more items for sale that are not listed so if your interested just send me a message. -Cheers
How much are you looking to get for the injectors ?
1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam
I'll let them go for $250.00. They've only been used for approx. 5,000km, they come with the injector seals and 2 ohm resistor plugs. After shipping to Canada from JWT these cost just over $500.00
Bump. All items still available
How much do you want for the transmission? And are you willing to ship to east of Toronto? Postal code K0K2B0, please let me know ASAP.
I need the idle speed control motor. Can u give me a price?
BUMP........ TONS OF PARTS STILL AVAILABLE
how much for front mount with shipping l6r 1r1
Full 3' exhaust for sale with decat pipe and all hangers included. SOLD
GTIR tranny for sale, has just over 100,000km on it, synchro's and bearings are in great shape. SOLD
Interested in exhaust and what else you still have, coming to Regina any time soon?
bump wondering if you still have exhaust?
I do still have the exhaust... I have a buyer for the first two sections but not the muffler portion and I'd like to get rid of all 3...
Leafs31 I'll actually be in Regina tomorrow and Sunday. If you can get a hold of me before I leave I'll take it with me... My number is 306-262-7926 ask for Ryan. If not I can probably send it with a friend next weekend who is going to Euroshow. Anything else your interested in???
It's alright about the exhaust I wanted the whole thing. The FMIC did you have to cut a large portion of the bumper out? What about the 300zx MAF?
You don't happen to have the top dash pad in good condition that is a part I really need?
Sorry the FMIC is already sold, the MAF is still available and the dash is not available.
how much do you want for that last section? local pickup?
Also, do you have the passenger side front driveshaft?
RNN14
transmission and exhaust are SOLD
Is the turbo still available? How much are you looking to get for it? Thanks.
Yes the turbo is still available. Just before the car died it was pushing 14psi no problem but had a little bit of shaft play. I rebuilt the turbo a few months ago and is in like new condition now. $400
receaved my exhast while on holiday from ryanking123. was well packed and exactly as advertised and shown. Plesure to Deal with thanks!
Mine isn't bigger than yours.. I just like to drive
BUMP! More parts for sale!
Darton Sleeves
Condition - New, I only took 1 out of the box to take a pic
$300
ARP head stud kit
$80
Apexi NEO AFC with the adapter harness for the Gti-R (they don`t even make these harnesses anymore)- direct plug and play
Bought it for $300, the adapter harness was another $100
$250
OEM ECU
$50
OEM Speaker/Sub/Amp setup
$100
Intake manifold, Plenum, and Throttle bodies - $50
Razo Air Filter - $20
ABS pump, ECU and both front sensors - make an offer
Distributor body, rotor, cap and 8mm ignition wires (rotor, cap and ignition wires have less than 5000km on them) - $100
Ohlins Suspension - Pretty sure both fronts need to be rebuilt, rears are fine though. Springs on all 4 are fine.
$100
Wiring goodies! If anyone needs and sensors, modules etc. let me know!
Also still for sale:
- 300ZX MAF with pigtail - $100
- JWT 72lb/hr (750cc) Injectors only 5000km on them - $200
- Rear Seats and seat belts - No tears or cig burns - $50
- Any interior parts needed let me know and I'll see what I can do
- Fuel Tank and sending unit - $20
- E-brake cables $20
- Walbro 255 lph fuel pump $20
Note - Anything that isn't sold by summer will be getting trashed
Do you have abs sensors for the rear?
No, they were destroyed during removal.
Are the jwt injectors top feed :(
1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam
They sure are. The injectors are already spoken for though.
EDIT - Injectors still available!
got the sway bar end links ?
Yes but they are not for sale.