Home › Forums › Buy and Sell › For Sale

91 nissan pulsar gtir 5000$$$$ with ve motor

Posted: Mon, 04/04/2011 - 4:27pm
91 nissan pulsar gtir 5000$$$$ with ve motor

i have a 91 pulsar for sale on here has a new paint job on it cross drilled rotors in the front has no interior only the two front seats and dash.. comes with a gtir block with cp pistons, manly rods, acl race bearings, with a sr20ve head on it with the sr16ve cams in it.. has a water to air incooler a t3/t4 turbo cast iron top mount manifold 38mm wastgate, apexi power fc and lots more to list so why not drive this nice car away and save $$$$$ today.. was going to part it out but will sell evrything for 5000$$$ as is no low ballers thanks p.s still waiting for a guy to come down to pick up the shell so first come first serve thanks

#1
Posted: Mon, 04/04/2011 - 5:50pm

Anything upgraded/aftermarket?

#2
Posted: Mon, 04/04/2011 - 6:16pm

everything is stock on the car

#3
Posted: Mon, 04/04/2011 - 6:58pm

DO you have the piece that blocks the dirt on the side skirt on the driver side heres a pic of what i mean and also how much for the spoiler IMG_0259.jpg

#4
Posted: Tue, 04/05/2011 - 11:52am

How much for spring/strut assembly front n rear

#5
Posted: Tue, 04/05/2011 - 1:36pm

i would do evrything for 350$$$ but so far not alot of ppl need pats still waiting untill i have a few more ppl that wants parts so i will keep you in mind..... thanks so_jdm

#6
Posted: Tue, 04/05/2011 - 1:39pm

i would do everything for 350$$$$ for the springs and struts but still waiting for ppl to buy more parts so i can take things apart i will keep u in mind thanks Gtir_tyler

#7
Posted: Tue, 04/05/2011 - 1:49pm

get some pictures of the whole car

__________________

1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam

#8
Posted: Tue, 04/05/2011 - 3:50pm

CIMG3450.jpgCIMG3448.jpgCIMG3447.jpgCIMG3446.jpgCIMG3445.jpg

#9
Posted: Tue, 04/05/2011 - 4:13pm

What are you doing now with that vet motor :) ?

__________________

1992 nissan pulsar gti-r Black sold :( 1993 Nissan pulsar gtir red/rusty parts car from quebec 1992 infiniti g20 project car 1992 nissan nx2000 u13 sr20det/5spd/hardtop 1990 nissan pulsar gtir fully built vet with to much jam

#10
Posted: Tue, 04/05/2011 - 4:32pm

what kinda exhaust is on there and how much do you want for it?

#11
Posted: Tue, 04/05/2011 - 5:55pm

am going to keep the vet motor cause nobody wants to pay what i want for it i would like to get 5000$$$ fot it or 8000$$$ for motor tranny ecu

#12
Posted: Tue, 04/05/2011 - 5:57pm

from the turbo to cat is 3inch and the rest is 2.5 inch with a 5zigen exhaust

#13
Posted: Tue, 04/05/2011 - 5:57pm

from the turbo to cat is 3inch and the rest is 2.5 inch with a 5zigen exhaust

#14
Posted: Wed, 04/06/2011 - 4:25am

Do you still have the Floor mats(how muchy)?

#15
Posted: Wed, 04/06/2011 - 5:10am

5000 for a ve motor?

#16
Posted: Wed, 04/06/2011 - 2:10pm

yes 5000$$ for the vet motor it is a gtir block with manly rods cp pistons ACL race bearings with a sr20ve head with the sr16ve cams in it the block was honed and hot tank treated

#17
Posted: Wed, 04/06/2011 - 2:12pm

sorry no floor mats

#18
Posted: Fri, 04/08/2011 - 6:00pm

sup its dylan give me a call i want sum parts 647 717 7090

#19
Posted: Fri, 04/08/2011 - 8:40pm

If the carpet is in good shape I might be interested if the shipping is not too crazy to the US. And maybe the door mirrors.

__________________

91 GTIR
98 Legacy GT
66 Volvo 122 (w/nissan ka24de)
94 Toyota truck
00 Legacy GT wagon

#20
Posted: Sat, 04/09/2011 - 4:19pm

sorry no carpet i took it out it was in bad shape the mirriors i want 160$$$ for both and u pay shipping

#21
Posted: Tue, 04/12/2011 - 10:38pm

how much for the engine harness with the injector resistor box attached to it, also I may be interested in the maf too, curious if you have a complete gtir intake manifold too, give me a price I would like to get this pretty soon pm me or email me at sr71sss@yahoo.com

conrad

#22
Posted: Tue, 04/12/2011 - 10:40pm

how much for the engine harness with the injector resistor box attached to it, also I may be interested in the maf too, curious if you have a complete gtir intake manifold too, give me a price I would like to get this pretty soon pm me or email me at sr71sss@yahoo.com

conrad

#23
Posted: Sun, 04/17/2011 - 2:48pm

I need the front lca left side please. how much ?

#24
Posted: Fri, 04/22/2011 - 10:26am

I need the trans! Pm me plz!

#25
Posted: Fri, 04/22/2011 - 2:11pm

hey everybody i got everybodys pm and so far the shell is sold so i will know once i get the depoist from the person if he does not come through i will pm everybody thank you every one........ On a different note the whole car is for sale as is for this week only for 6500$$$ as is so for one week only get a deal of a life time just to see what people think thanks...

#26
Posted: Tue, 05/03/2011 - 8:07am

How much is the shell going for? RUst?

#27
Posted: Tue, 05/03/2011 - 8:07am

Does it have a sunroof?

Canada GTiR Forum

more

User login

Popular GTiR Articles

more