1991 gtir for sale :(
Offline
verified userwell it may be time for me to move on from the Pulsar world. I do love my car but i find im coming to a standstill with what i can do with it so i am going to entertain the idea of parting with it. I'm not sure what to ask for it in terms of price so i'm looking for some input The car has a Toda 2.2 stroker bottom end the top end is all Tomei cams and double valve springs etc. (pics in the gallery).
there is a twin plate OS Giken Clutch with no slippage at all. Nismo front LSD Diff Quaife Gearset C's Short shifter. Remote oil filter Front mounted oil cooler. custom made intake with z32 maf custom made oil catch can. Nismo engine mounts. NismoStrut Bars Full Bolt in roll cage Custom inner fender braces custom under motor braces cusco lower brace Tein Coilovers Cusco adjustable camber plates. Phoenix Power dump pipe and Full Phoenix power stainless 3 inch exhaust front to back to Phoenix Power Depart twin mufflers. aem wideband Greddy Boost Gauge Apexi Power Intake Air Filter. Phoenix Power 5 Piece Bodykit ( The Only Kitted Pulsar In Canada That I know Of ) Has An ARC top mount Intercooler and 550cc Injectors.
I Have a mint dash for the car as well and will prob be installed soon if not it will come with the car as well as all the interior pieces. Front brakes are Brand New Willwood 4 piston kit. pads rotors and calipers are all brand new. Stainless brake and clutch lines installed on the car. Tomei Brake Master Cylinder Stabilizer Installed. Ground Kit Installed in engine bay. a/c delete. Greddy Profec EO1 Boost Controller. ( Not Installed Right Now) Chipped Ecu No rev or speed limit. For the life of me i cant remember who the chipped ecu is from . I do have a Power FC With Controller But Its not installed. Fuel Pump Has Been Upgraded as well. HID Ballasts are in the car but no HID bulbs. E code Headlights Passed All B.C inspections. All 4 fenders are rolled. Body is not perfect But its not bad either. Fiberglass Hood With Hood Pins. Car Will Come on White 5 Spoke 18's Nothing fancy but they get the job done. Pictures can be seen in my gallery if more pictures are wanted just ask i will get you whatever you need.Oh Car will also come with a brand new Windsheild a sthe one in it right now is cracked. will be replaced before it is sold. Also there is a RE Ameyama Rear Bar In the car. Whiteline Front Swaybar ( I think Its Whiteline) I know this post is all over the place i was writing things down as they come to mind. I will update as i remember or if asked. so Give me an idea of what i should start the pricing at thanx guys. Car has ran a 12.7 Quater mile i have the time slip for that. it hasnt been raced very much just a few times this year that was all. Very Fast . Also i am willing to drive the car to Sask AT THE NEW OWNERS EXPENSE. Thanx again
pics here.
http://www.canadagtir.com/gallery/user/no_boost
THIS IS NOT A PART OUT THREAD
$12500
I would be interested in the skirts, spoiler, coilovers, cage, intake and prob a bunch more if you can come up with a full list with prices.
I would be interested in the skirts, spoiler, coilovers, cage, intake and prob a bunch more if you can come up with a full list with prices.
I think he meant part with the car, not part it out. It'd be a shame to part out a nicely built gti-r.
I would be interested in the skirts, spoiler, coilovers, cage, intake and prob a bunch more if you can come up with a full list with prices.
I think he meant part with the car, not part it out. It'd be a shame to part out a nicely built gti-r.
That is correct this is not a part out thread. i am not wanting to part this car out at all. a well built pulsar is not easy to find I want to sell the car complete and i am hoping it goes to a real GtiR lover who will take care of the car. It is a great car and someone will definatly get a one of a kind Pulsar. I have also edited the original post stating it is not a part out thread. this car is ready to go turn the key and you are on ur way.
My bad. Do you have a starting price?
well i have been doing some thinking. and i know people are going to say the usual things like thats too much etc but for what i have into the car i would like to start at around $12,500. i kno wits alot compared to the other Pulsars out there but your also getting alot more car then most. the price im starting with doesnt even cover what has been put into the motor and trans. and never mind the bodykit or the cage ecu maf injectors or the ARC intercooler or the coilovers and the price of the car. im not looking to make all my money back but i would like to see some and someone is going to get a really nice really fast Pulsar. so please keep the flaming about the price to a minimum and if it sells great if it doesnt no big deal. and again im not interested in parting it out.
Well considering the Toda stroker kit and Quaife Gearset I think the price is good. I wouldn’t take any less than $12,500!!!!
Well considering the Toda stroker kit and Quaife Gearset I think the price is good. I wouldn’t take any less than $12,500!!!!
i thought it was a pretty fair starting point. i have put alot more than that into it. i know its alot more than most Pulsars but i think its worth it. i guess time will tell if i have picked a good enough price.
man thats a sick car and a sweet price- if i had the cash it would be in my driveway already- good luck with the sale
BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN
Well since you're in no hurry to sell, if its still around in 2 years, pm me!
the ECU is chipped from Auto Garage Freestyle In Japan
Car is officially for sale. i am willing to drive it to Sask at new owners expense. or i will pick someone up from the airport if your not local. Starting at $12500.
what sort of power is this think making bro?
BOTTLES ARE FOR BABIES.. REAL MEN GET BLOWN
I agree with above comments on price. The amount of work done is impressive; looks well worth it and hard to beat. Appears like a lot of effort and tlc went into it over the years. Sorry you have to sell but what a super car up on the block ...
fwiw> To a get a rough estimate* of flywheel HP off of the 12.7 sec quarter mile time slip: divide ET by a unit factor of 6.29; then multiply the result by itself three times and then divide that number into the test weight of your vehicle.
formula: HP = {Veh.Weight/([E.T./6.29]^3)}
*factor in formula assumes a 17% powertrain loss i.e. est result above aprox 340hp depending on wt.
Noticed anything "funny" with the exchange rates and parts prices lately:
New Scarier Insider Information: http://www.youtube.com/watch?v=uPg4qTNTP-E
Save Real Money for your Nissan Pulsar Gtir Upgrades!
http://www.canadagtir.com/gallery/user/91gtirgrey/wont-last-long-buy-physical-silver-now
***** "May you live in interesting times."
where are you located?
why drive any car.... drive your dream car!
I'm in surrey not far from you at all.
hummmmm well im waiting for work but if you still have it at the end of march im intrested then i can keep mine as close to stock :) ill keep in touch but hope you can sell it first!
why drive any car.... drive your dream car!
NEVER BUY SOMETHING FROM THIS GUY
HE HAD STOLEN ME 3200$ I NEVER RECEIVED MY QUAIFE BOX WITH NISMO LSD I M WAITING FROM 2 YEARS NOW?
NO NEWS FROM HIM SINCE 10 MONTH
HE PROMISE ME TO SEND ME MY MONEY OR GEARBOX BUT NOTHING........
A car without turbo, it is like a coke without bubbles ......