Looking for any blown up sr20 transmission.

7 posts / 0 new
Last post
wdetlor's picture
Offline

Kingston, Ontario

Dec 11, 2011
Looking for any blown up sr20 transmission.

Looking for the flange section of a fwd sr20 bell housing. Any fwd sr20 bell housing will work. If you have a blown up transmission as long as the flange isn't cracked I'm interested.

Pulsar666's picture
Offline

Erik
laval

Jun 10, 2012

Do you have a picture of what you are searching ?

Also what series transmission does that part comes from ? 50v ? 32v ? 70v ?

wdetlor's picture
Offline

Kingston, Ontario

Dec 11, 2011

As long as it will bolt into a block I don't care

wdetlor's picture
Offline

Kingston, Ontario

Dec 11, 2011

An sr20 block that is.

Lynx's picture
Offline

London Ontario

Dec 23, 2009

get one plasma cut.  What tranny are you going with?

wdetlor's picture
Offline

Kingston, Ontario

Dec 11, 2011

Too expensive. Sticking with the gtir's tranny. This is for something else. And getting one cut out of plate would be too expensive because it would have to be about 3" thick.

St00per's picture
Offline

Frederick
Montreal

Sep 29, 2016

I got a lower block and working tranny from a blown engine, are you still looking?