Correct me if I am wrong, but doesn't this also shift the rear wheels outboard by 10mm? I think that's important to know if someone is going to adopt this. Could be a problem unless you're willing to invest in new wheels as well....
{edit] Yes, the poster does note a 20mm track increase at the back. I've never tried this - anyone know if it causes clearance issues to the fenders?
"Your race car should be easier and more pleasant to drive than your street car. If it isn't, then someone is doing something wrong." -- Carroll Smith (1932-2003)
some people dont want to put oem stuff back on there. There are much cheaper alternatives in aftermarket. And also if you are looking for performance rotors, you are much more likely to find a set of nx rotors over here.
soo whats the deal lol has anyone done this yet i need rotors badd!! i think my back brake caliper is seezing up aswell im getting a pull when on the highway. last time changing the pads the rubber seal torn off and i think some dirt and crap has got in there any suggestions?
hi! im really dont know how big rear rotors of gti-r are. i made a nissan sentra awd whit gtir complete swap when i buy the stuff the come w/o rear brakes and here in puerto rico obviusly gtir dont exists and i dont find the rear brakes and i need to swap some brakes.. u used rear brakes from a Nissan Maxima from 1990 . i made 5 to 4 holes. to fit in hub. and made a litle braket.
and its done! its more bigger yjam SE-R rear brake and Nx 2000, size is similar to AD22 i have add22 in front and maxima brake rear and its very similar in size maybe same. i will take a time to take the size of both..
tomorow i will post a picture of brake convertion..
Correct me if I am wrong, but doesn't this also shift the rear wheels outboard by 10mm? I think that's important to know if someone is going to adopt this. Could be a problem unless you're willing to invest in new wheels as well....
{edit] Yes, the poster does note a 20mm track increase at the back. I've never tried this - anyone know if it causes clearance issues to the fenders?
"Your race car should be easier and more pleasant to drive than your street car. If it isn't, then someone is doing something wrong." -- Carroll Smith (1932-2003)
it will not cause clearance issues with stock wheel. In fact the track in the rear is narrower than the front so this will actually even it up a bit.
where to find 10mm wheel spacers now?
RNN14
i think i actually have a set haha. But just got some real R rear rotors anyway.
http://cgi.ebay.ca/10mm-JDM-Wheel-Spacer-4x100-4x114-3-4x98-4x108-4x110-/350370490887?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item5193b56a07
I had no problem getting GTi-R rotors at brasso nissan, in a couple days too.. if your in calgary its the place for parts
1991 GTiR r.i.p
1979 Volvo 262c Bertone *SOLD*
1991 GTiR No. 2 :D
some people dont want to put oem stuff back on there. There are much cheaper alternatives in aftermarket. And also if you are looking for performance rotors, you are much more likely to find a set of nx rotors over here.
soo whats the deal lol has anyone done this yet i need rotors badd!! i think my back brake caliper is seezing up aswell im getting a pull when on the highway. last time changing the pads the rubber seal torn off and i think some dirt and crap has got in there any suggestions?
I have a set of rear rotors in good shape, comes with pads.
send me a pm with the price !!
http://www.canadagtir.com/forums/buy-and-sell/for-sale/gtir-stuff
hi! im really dont know how big rear rotors of gti-r are. i made a nissan sentra awd whit gtir complete swap when i buy the stuff the come w/o rear brakes and here in puerto rico obviusly gtir dont exists and i dont find the rear brakes and i need to swap some brakes.. u used rear brakes from a Nissan Maxima from 1990 . i made 5 to 4 holes. to fit in hub. and made a litle braket.
and its done! its more bigger yjam SE-R rear brake and Nx 2000, size is similar to AD22 i have add22 in front and maxima brake rear and its very similar in size maybe same. i will take a time to take the size of both..
tomorow i will post a picture of brake convertion..