Interchangeable/Compatible Parts

9 posts / 0 new
Last post
dmgtir's picture
Offline

Calgary,AB

May 9, 2012
Interchangeable/Compatible Parts

Im looking for a car i can use to get compatible parts from. I need the engine mounts and both belts.
Im thinking early 90's Sentra SE-R for both engine mounts and belts? Just want to make sure it fits before i buy it. 
so far iv gotten the following and they work/fit fine:

Front Rotors - 90's NX2000 w/ ABS
Front Brake Pads - 90's NX2000 w/ ABS
Rear Rotors - Couldn't find Nothing
Rear Brake Pads - 90's Infiniti G20
NGK Ignition Leads - 90's Sentra SE-R

Can someone recommend a good clutch? Should i replace my pressure plate if im replacing my clutch?

tech44's picture
Offline

BC

Mar 22, 2010

If you want the right front engine mount(nearest timing chain), I found that the dealer price for a GTI-R was cheaper than the other SR20 equipped front wheel drives; both B13 SE-R and P10 G20.  I know for  a fact the the N14 GTI-R mount fits in a G20 because I grabbed the wrong part from my garage, whoops.   Whether or not a G20 one will fit in a GTI-R, I am unsure; you do also have the option for the aftermarket inserts.  As far as clutches, I have no aftermarket experience; sorry/

nick's picture
Offline

Nicholas Chu
Vancouver

Jan 24, 2008

http://stores.ebay.ca/Erics-Performance-Parts/_i.html?_kw=engine&_kw=mount&_sid=76590873

tech44's picture
Offline

BC

Mar 22, 2010

nick wrote:
http://stores.ebay.ca/Erics-Performance-Parts/_i.html?_kw=engine&_kw=mount&_sid=76590873

That's a good link.  Seem like competitive prices too, although freight may have to be taken into consideration.  The nice thing is that they list the part numbers so you could also price those numbers out at your local dealer.  Stadium near by you, dmgtir?

dmgtir's picture
Offline

Calgary,AB

May 9, 2012

Thanks but i dont need the actual mount all i need is the rubber bushing insert. is there no way of getting just that? 

And what bout the belts.

1990 Nissan Pulsar GTi-R

1991 Nissan Pulsar GTi-R

calgaryJDM's picture
Offline

Calgary

Mar 22, 2008

For the clutch anything for a 3.0l maxima from the late 80's all the way till the end of the vg30 will do you fine. I put a stage one (organic) exedy in my first one. All parts are the same

1991 GTiR r.i.p
1979 Volvo 262c Bertone *SOLD*
1991 GTiR No. 2 :D

nissannx's picture
Offline

Frank Ewald
BC

Oct 23, 2010

What about the alternator? Anything compatible?

 

nick's picture
Offline

Nicholas Chu
Vancouver

Jan 24, 2008

um yes, i'm using a 2002 sr20de alternator thats the 90 or 100amp (can't remember) vs 80amp for the oem

 

ZED_not_zee's picture
Offline

Really Noneyourbuis
Canada

May 11, 2008

infinity G 20 alternator here

Mine isn't bigger than yours.. I just like to drive