Drunk driver hit me and wrote my pulsar off. Having a part out now. Let me know what you guys want. Not everything is listed on the parts list so send me a msg and I will see what I got. I have tons and tons of spare parts. 156k kms on engine+trans runs strong. EVERYTHING is for sale panels, trim, windows just name it.
dude if u get pictures tha would be great.
Shake and bake
Will take more and better pics once everything is stripped. every panel is for sale mint dash. whatever you need name it. bumper comes with the GTR lip.
Nismo rear strut bar
Rear LH axle
Nismo rear strut bar and axles are on hold.
Struts bars are sold but the rear sway bar (Whiteline) still available. Right fender no dents. Got left side turn signal for fender as well. both side side skirts. Ebrake cable. 3 inch stainless downpipe dented scraped but not worn through. Full rear end (Axles, subframe, A- Arms, Tow arms, diff, bigger rear brake conversion(lines, calipers, pads,rotors) extended wheel studs.
Drive shaft, BC racing coilovers (not blown just washed in picture) Comes with adjustment tools good condition minus paint on springs, 9 and 7kg spring rates comes with rear camber bolts for rear and has camber plates up front.
pmed
1992 nissan pulsar gti-r Black sold/1993 red/rusty parts car /1990 nissan pulsar gtir fully built vet with to much jam
Trunk lift struts
ecu still have
Nistune sold, trunk lift is on hold.
Front Lip GTR fit on your front Bumper or full bumper, how much? Reply me in PM! I'm from the Qc, possibility to be shipped?
Give me the price for your BC Racing Coil Over at the same time!
WhiteLine 4points Underbrace too!
M4r1n
Hey guy I got injured a few days ago leaving me not too mobile right now. I'm also going away for 2 weeks and will be back on the 23rd. So I will not be able to ship anything out until I'm back as I need to recover from injuries first as well. Feel free to drop me PM's for stuff you want. I made a list of everyones stuff they want and have put aside in different piles. Mostly everythings already stripped on the car just can't really move around and pack things out for shipment for everyone right now. Thanks for everyones patients!
Just a small update before I leave on my trip for a week in an 2 hours. Short shifer, mostly unbutchered wiring minus the few light connectors that got smashed during the accident. I've got lots and lots of interior + extrior trim panels still available. Windows, hatch, doors, skirts, gas tank. Motor compression tested 160 across have pics of it. Only thing left to do is pull motor, glass and doors and its ready to be crushed and scrapped.
rear tail lights
Go see your MP!
And a question: Do you have the metal plate that cover the wiper motor?! In good shape for sure?! I'll be interest in this part + what's in the MP!
Hey guys I'm coming back into town today. Drop me some pm's again as I might've missed it during my trip. I got sooo many pm's and emails and stuff from people so it was hard to sort through all of them when I was gone. Thanks!
So much I couold use! PM coming your way!
91 GTIR
98 Legacy GT
96 JDM Legacy GT-B
66 Volvo 122 (w/nissan ka24de)
94 Toyota truck
Respond to my last PM please!
I had no PM M4r1n resend msg! Thanks
I'm interested in the stock cast airbox, specifically the top half of it.
This is for a conversion, and if you're not willing to seperate it from the motor, I understand, just say so.
I'm not a noob to car forums, just this one. :)
front bumper with lip and spotlights pm if you still have would need shipped to scotland tho?
Take one from a sentra with the sr20 engine, thats the same thing unless you want the maf with it
I wish it were that easy. I need the turbo airbox, and I don't think the Sentra came with one of those.
I'm not a noob to car forums, just this one. :)
i compared them a long time ago and they really are the same. the bolt holes on the bottom part are at the same place, the bolt pattern for the maf is identical and they use the same air filter like almost all nissan cars so what would make them different ?
Based on what I'm seeing on the net, the sr20de intake manifold is a solid cast unit, the GTI-R is a two piece bolt together unit (and I want the top half, so that I can attach it to an adapter plate like this)
I'm not a noob to car forums, just this one. :)
Dude seriously, this is what we call the intake plenum. The airbox is the plastic box you put your air filter in it so you created a confusion. Just buy a complete intake like i did last winter, easier to find them that way and they are relatively cheap.
PMed.
right hand front axle?
Good seller, fast shipping... He sent detailed pictures of everything and explained/showed any flaws. No issues with staying in contact. I bought a bunch of random bits when this was first posted.
Hi, I am looking for fuel injectors + plus harness + rear tail gate. Please let me know if you have any.
Thank you
Update:
Everything is sold. Thanks for everyone that msged me and bought from me hopefully your all happy with what you got. Really missing my GTiR and the community maybe one day I will get another one but that wont be for a while.
Thanks guys
Thanks for the goodies Mike. Your R lives on through mine
Need the rear fender metal moldings
1992 nissan pulsar gti-r Black sold/1993 red/rusty parts car /1990 nissan pulsar gtir fully built vet with to much jam
The small metal molding around the rear wheel fender